Assembly

Model E Assembly


The Model E Indoor Rower requires the installation of the front and rear legs, the monitor arm, pickup cable, and the Performance Monitor using a total of 10 screws. We include the necessary tool and clear, illustrated instructions. Allow about 30–45 minutes for the job.

Video Model E Assembly


Connecting the Monorail End with the Flywheel End

Once all the installation steps are completed, you will need to connect the monorail end of the indoor rower with the flywheel end. This procedure is illustrated in the assembly instructions, or refer to the following video.

Video Framelock Connection
 

 

Assembly Instructions

Model E Assembly Instructions

Box 3 Note: The nut and bolt shown as part of the contents for Box 3 are installed in the case back of the Performance Monitor; they are not loose in the box.